AC Infinity CLOUDWAY T12 Whole House EC Fan 1600 CFM Energy Efficient
SKU: AC-CRT12
Description
- A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces.
- Dynamic temperature, humidity and VPD programming, with timers, cycles, scheduling, and minimum speed.
- Remotely connect to the Wi-Fi app to access advanced programs, view climate data, and set automation.
- Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others.
- Duct Size: 12" | Dimensions: 12.3 x 17.7 x 14.1 in. | Airflow: 1250 CFM | Noise: 62 dBA | Bearings: Dual Ball
Product Description: A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by a Wi-Fi-enabled digital controller, featuring a smart thermostat with triggers, fan speed control, status alerts, and more. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly at a maximum of 62 dBA. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use.
Intelligent Controller: CONTROLLER 69 PRO features smart programming like temperature and humidity triggers that activate whenever your house gets too hot or humid. Maintain a consistently cooler climate by setting a minimum fan speed that will run continuously and only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for even greater control. Securely connect to the AC Infinity app through Wi-Fi to utilize automation capabilities from anywhere throughout the day. Access your fan remotely, unlock advanced programs, set notifications, view historical climate charts, and export CSV data.
Efficient Performance: The PWM (Pulse Width Modulation) controlled motor not only spins the fan quietly, but also consumes up to 95% less power than air conditioner units. The attic fan uses dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use, keeping attic air from entering your home.
Specifications
Product Identification
- Manufacturer: AC Infinity Inc.
- Product Name: CLOUDWAY T12
- Product Model: AC-CRT12
- UPC Code: 819137021099
Product and Mounting Dimensions - Fan Unit
- Duct Size: 12"
- Duct Tube Length: 6 ft.
- Total Dimensions: 12.28 x 17.71 x 14.05 in. (31.2 x 45.0 x 35.7 cm)
- Mounting Hole-To-Hole Distance: 7.00 x 7.12 in. (17.8 x 18.1 cm)
- Screw Hole Diameter: 0.462 in. (1.18 cm)
- Cord Length to Controller: 120 in. (10 feet)
- Cord Length to Plug: 96 in. (8 feet)
Product and Mounting Dimensions - Controller
- Total Dimensions: 3.66 x 3.11 x 0.98 in. (9.3 x 7.9 x 2.5 cm)
- Display Size: 3.5 x 1.4 in. (9 x 3.5 cm)
- Sensor Probe Length: 144 in. (12 feet)
- Total Airflow: 1250 CFM
- Total Noise: 62 dBA
- Static Pressure: 410 Pa
- Voltage: 100-240V AC
- Frequency: 50/60Hz
- Max Power Draw: 244 W
- Average Power Usage: 139 W
- Current: 2.5 A
- Power Connector Type: US Plug (NEMA 1-15 Type-A)
- Operating Humidity: 35 to 85% RH
- Operating Temperature: 0 to 140 degrees F
- Ingress Protection: IP 44
- Fan Bearings: Dual Ball
- Mounting Positions: Horizontal or Vertical
- Manufacturer Document References: See the scoped manufacturer documents in Data Sheet.
Data Sheet
- AC Infinity fan-materials report extract SZXEC1900177001 (supersedes SZXEC1900087001; 17 published pages); historical tested-materials reference, not certification of the assembled kit or its controller.
- CLOUDWAY manual CW2306X1; T10/T12 smart-controller models
- En stock
- Pedido pendiente, envío pronto
- Secure checkoutSSL · Encrypted
- 30-day returnsEasy exchanges
- Carefully packedInsured shipping

