Active Aqua 4' X 8' Rolling Bench System
SKU: AARBK48
Description
The Active Aqua AARBK48 rolling bench moves from side to side to create an aisle where it is needed. Its heavy-duty galvanised-steel construction accepts flood tables, expanded-metal tops or wire-mesh tops. Benches connect end-to-end in 8 ft increments for custom lengths.
Peaked roll bars support smooth movement and help prevent soil, chemical and water buildup. A special retainer helps prevent the bench top from tipping. Parts have pre-punched holes for assembly.
The bench measures 4 ft wide by 8 ft long by 28¾ inches high and rolls 7¾ inches to either side. The manual states a load limit of 18 lb per square foot with a 576 lb maximum concentrated load when properly installed and bearing evenly distributed weight.
Install on a hard, level surface and securely bolt every leg anchor to the floor. For concrete floors, ¾-inch anchor bolts are recommended. Distribute the load evenly on the cross-bars; do not load only the cantilever side. Failure to bolt the leg anchors to the floor voids the manual’s warranty condition.
Note: Tray AATUL84 is compatible if only one 4x8 rolling bench is needed.
The manual lists the 4 ft × 8 ft Active Aqua Flood Table AAHR84W as an optional accessory.
Specifications
- Model: AARBK48.
- Width × length × height: 4 ft × 8 ft × 28¾ inches.
- Travel: 7¾ inches to either side.
- Construction: heavy-duty galvanised steel.
- Load statement: 18 lb per square foot and 576 lb maximum concentrated load, subject to proper installation and evenly distributed weight.
- Anchoring: leg anchors must be securely bolted to a hard, level floor.
- Barcodes: 638104023757 (UPC-A)
- Dimensions: 98.0L x 12.0W x 7.0H (EA) 99.0L x 46.0W x 41.0H (PL)
- Shipping Weight: 97 lbs.
Unboxed figures (units not specified):
- Height (Unboxed): 36
- Length (Unboxed): 96
- Weight (Unboxed): 87
- Width (Unboxed): 48
Data Sheet
Operating instructions and technical document references:
Active Aqua AARBK48 Rolling Bench Manual
Kit Contents
- 20 nuts
- 96 bolts
- Four corner pieces: two left and two right
- Four leg anchors
- Four corner braces
- Four bench legs
- Two V-bars
- Nine cross-bars
- Two stop keepers
- Two bench shaft pipes
- Two side rails
- Two Z-runners
- Four corner support brackets
- One hex wrench
- One open-ended wrench
- In magazzino, pronto per la spedizione
- In arretrato, spedizione a breve
- Secure checkoutSSL · Encrypted
- 30-day returnsEasy exchanges
- Carefully packedInsured shipping

